New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Lauderdale Lakes pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Impact Windows & Doors Across Sunrise
Impact window and door replacement in Sunrise runs $800-$1,500 per standard opening, with whole-home packages starting near $8,000. Every unit we specify carries a Miami-Dade Notice of Acceptance or Florida Product Approval number matched to Broward County’s HVHZ requirements, and we pull permits before any old window comes out. Call (754) 240-8381 to schedule your free measured survey and written quote.
We serve Sunrise from our South Florida scheduling office, with crews working locally through neighborhoods from Sunrise Lakes to Sawgrass Estates. The city’s concentration of 1970s-1980s CBS tract homes and low-rise condo buildings means we’ve replaced thousands of original aluminum single-pane sliders and hollow-core doors with impact-rated assemblies that satisfy both the building department and the insurance underwriter. Our Impact Windows & Doors team knows the difference between a drop-in replacement and a full-frame removal, and we document which your opening needs before quoting.
Why Sightline Windows & Doors Lauderdale Lakes Is Sunrise’s Preferred Impact Windows & Doors Company
Sightline operates under the Haven Standard, which has governed every one of the 18,000+ openings we’ve installed since 2012. In Sunrise, that means the measured survey you keep and the written quote we deliver are the same document. No change orders. No mid-project surprises.
Our technicians are background-checked, uniformed, and identified by license number before arrival. Haven Clause 3, Verified Crews, means the person at your door matches the person on the record. We document every visit with a photo record you receive, and every job carries the 365-Day Done Right Promise stamped in writing, not offered as a courtesy.
Calls to (754) 240-8381 are answered by a live person, 24/7. Not a voicemail queue. Not a callback window.
We know Sunrise’s permitting path. Broward County’s HVHZ office requires the product’s NOA or Florida Product Approval number cited on every permit application. We pre-verify that number before quoting. Contractors who skip this step show up with non-listed products and get red-tagged mid-project, often after the old windows are already out.
Before
AfterOur Impact Windows & Doors Services in Sunrise
Impact-Resistant Windows
Every replacement window in Sunrise must meet HVHZ standards, the most stringent in the U.S. We specify PGT, CGI, CWS, and ViewLux impact-rated lines by what your opening requires: design pressure, frame material, and glazing package. In Sunrise’s 55+ communities, where window schedules repeat unit-to-unit, we can run identical assemblies across dozens of openings once the HOA approves the spec.
Hurricane Impact Windows
Hurricane impact windows in Sunrise carry laminated glass interlayers and reinforced frames tested to wind-borne debris impact and cyclic pressure loading. We match the design pressure to your exposure: single-story CBS tract homes near Sawgrass Mills face different loads than upper-floor units in Sunrise Lakes condo clusters. The Miami-Dade NOA number on your product must match the application, or Broward red-tags the job.
Single Hung Impact Windows
Single hung impact windows, with a fixed upper sash and operable lower sash, suit Sunrise’s original window openings where the rough opening depth and frame width are limited by 1970s CBS construction. We measure the existing jamb depth to determine whether a replacement fin or flush-fin application works, or whether the stucco return needs cutting back for proper HVHZ installation.
Double Hung Impact Windows
Double hung impact windows allow both sashes to operate, useful for second-story Sunrise condos where exterior cleaning access is limited and tilt-in sashes let residents maintain the interior glass from inside. The added hardware and balance system raise the unit cost 10-15% over single hung, but the ventilation flexibility matters in Sunrise’s low-rise buildings where cross-breezes reduce cooling load.
Horizontal Roller & Sliding Impact Windows
Horizontal roller sliders are the natural replacement for Sunrise’s original aluminum single-pane sliders, common in 1970s-1980s tract homes and 55+ units from Sunrise Lakes to Welleby. The sash travels on a flat track with minimal step-over height, and we can reset the pocket sill to a walkable threshold during replacement. This matters for aging-in-place retrofits where a walker or wheelchair needs clear passage. We stock CGI and PGT horizontal roller lines with Miami-Dade NOA numbers pre-matched to Broward’s HVHZ list.
Vinyl Impact Windows
Vinyl impact frames resist the salt-laden air and UV degradation that oxidizes original aluminum windows across Sunrise. The multi-chambered vinyl extrusion, combined with low-E insulated glass units, cuts thermal transfer compared to single-pane aluminum. In Sunrise’s inland climate, where summer cooling loads run high and winter heating is minimal, the solar heat gain coefficient (SHGC) matters as much as the U-factor. We specify the glazing package to the orientation of each opening.
Wind Mitigation & HVHZ Code Compliance
Every impact window and door we install in Sunrise is documented for wind-mitigation inspection: product approval number, installation method, and photos of the anchorage pattern. This documentation feeds directly into the uniform wind mitigation form that insurance underwriters require for premium credits. We do not install; we verify and document, because a non-compliant installation voids both the product warranty and the insurance discount.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
We draw from eight manufacturer lines, specifying by performance tier and price range, not by margin. In Sunrise, we most often deploy PGT and CGI for impact-rated horizontal rollers and entry doors, CWS for vinyl frame options in 55+ community retrofits, and ViewLux for custom geometric openings in architecturally varied subdivisions. Each product carries a current Miami-Dade NOA or Florida Product Approval number we verify against Broward County’s HVHZ list before quoting. We do not stock non-listed products, and we do not substitute mid-project.
Common Impact Windows & Doors Problems We See in Sunrise Homes
- Oxidized aluminum frames that won’t seal. Original 1970s-1980s aluminum single-pane sliders in Sunrise’s CBS tract homes have oxidized and warped to the point that a drop-in replacement cannot achieve an airtight seal. Full-frame removal and jamb repair are required before any HVHZ-listed unit goes in.
- Non-listed products red-tagged at permit. Impact windows sold freely in Central Florida, even from recognized brands, lack Miami-Dade NOA or Florida Product Approval numbers required in Broward’s HVHZ zone. Contractors who skip pre-verification discover the problem after old windows are removed, forcing costly mid-project swaps or permit abandonment.
- Thick tile-on-slab transitions blocking flat thresholds. 1980s installations at Sunrise sliders and entry doors left thick tile beds with no room for a walkable threshold. Impact door replacements fail step-free access unless the sill is milled down during install, a detail we measure and specify in the written quote.
- Glazing sealant failure from salt air and UV. Though Sunrise sits 15-20 miles inland, salt-laden air reaches the area and combines with extreme UV and near-constant humidity to accelerate sealant degradation on non-impact-rated units. Laminated glass interlayers and proper frame drainage, specified per HVHZ installation methods, prevent the condensation and fogging we see in original aluminum windows.
What Impact Windows & Doors Costs in Sunrise
| Service / Product | Price Range in Sunrise |
|---|---|
| Standard impact window (installed) | $800 - $1,500 |
| Impact single-hung window | $900 - $1,800 |
| Horizontal roller / sliding impact window | $1,000 - $2,000 |
| Impact entry door with flat threshold | $2,500 - $4,500 |
| Large or custom opening | $2,500 - $5,000 |
| Whole-home package (typical 3/2 CBS home) | $8,000 - $15,000 |
| Large home or complex retrofit | $15,000 - $25,000+ |
What moves the price in Sunrise: the number of openings, whether full-frame removal is needed versus retrofit installation, floor height (upper-story units require additional labor and protection), and frame material selection. Every quote begins with a measured survey you keep. The written price we deliver is the price on the final invoice. Haven Clause 1: Have it in writing.
Call (754) 240-8381 for your free in-home measure and written quote.
Florida Pays You Back
Several programs offset impact window and door costs for Sunrise homeowners. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, including impact-rated openings. Florida exempts impact-resistant windows and doors from sales tax. The federal 25C energy credit provides 30% of product cost, up to $600 per year, on qualifying energy-efficient units. After installation, a wind-mitigation inspection ($75-$150) documents the upgrades for insurance premium credits averaging around 25% on the windstorm portion of your policy. Program availability and carrier calculations vary; we provide the documentation, you confirm the benefit.
We Also Serve Cities Near Sunrise
Our crews work throughout central and east Broward County, including Sunrise, Lauderdale Lakes, Lauderhill, Oakland Park, and Fort Lauderdale. Scheduling and dispatch are coordinated from our South Florida office. Each city carries its own HVHZ requirements and permitting path; we verify the local list before quoting.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Sunrise
Yes. Every replacement window and door in Sunrise, including all Sunrise Lakes units, must carry a current Miami-Dade Notice of Acceptance or Florida Product Approval number cited on the permit application. Broward County’s HVHZ office will red-tag any installation lacking this documentation. We pre-verify the NOA number before quoting. Call (754) 240-8381 to schedule your free measured survey.
Yes, typically significantly. Original 1970s-1980s aluminum single-pane windows in Sunrise condos have no thermal break and no low-E coating. Replacing them with impact-rated units carrying low-E insulated glass units and vinyl or thermally broken aluminum frames reduces solar heat gain and air infiltration. The exact savings depend on orientation, shading, and your cooling system’s efficiency. We document the before-and-after performance specs in your written quote. Call (754) 240-8381 for a free estimate.
Yes, in most cases. We mill down thick 1980s tile-on-slab transitions during installation and reset the sill to a flat threshold suitable for walkers and wheelchairs. This requires measuring the existing slab and tile bed during survey, then specifying the modification in the written scope. Not every opening allows it, but we document whether yours does before any work starts. Call (754) 240-8381 to check your specific door.
A laminated glass interlayer is a tough plastic membrane bonded between two glass plies that holds the shard field together upon impact, the core of hurricane protection. A standard insulated glass unit (IGU) is two glass plies separated by a sealed air or gas space for thermal performance, with no interlayer. Impact-rated windows in Sunrise combine both: laminated glass for impact resistance, with a low-E coating and argon fill in the IGU for energy efficiency. We specify the glazing package to each opening’s exposure and your energy goals. Call (754) 240-8381 for specifics on your project.
Horizontal roller sliders are usually the better match for Sunrise condos built in the 1970s-1980s. The original openings were designed for slider operation, and horizontal rollers preserve the wide glass area and minimal step-over height that aging-in-place retrofits require. Double-hung windows work well where exterior cleaning access is limited or where the HOA’s approved spec calls for them. We measure your existing rough opening and document which option fits before quoting. Call (754) 240-8381 for your free survey.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Sunrise since 2012 under the Haven Standard.
Six Reasons Homeowners Choose Sightline Windows & Doors Lauderdale Lakes
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Lauderdale Lakes Services
What Neighbors Say About Sightline Windows & Doors Lauderdale Lakes