New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Lauderdale Lakes pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Impact Windows & Doors in Lauderdale Lakes, FL
Window Replacement in Lauderdale Lakes for impact window and door installation typically runs $800-$1,500 per standard opening, with whole-home packages starting around $8,000 and reaching $25,000 or more for extensive retrofits. Because nearly every home here was built in the 1960s-1970s with rough masonry openings sized for jalousie or single-pane aluminum units, most jobs require custom-sized HVHZ product or block modification before Broward County will close the permit. Call (754) 240-8381 to schedule your free measured survey; the written quote we leave with you is the same document we install from.
We’re the Lauderdale Lakes crew from Sightline Windows & Doors, dispatched from our South Florida office in Miami. Our technicians know the canal-side blocks off NW 31st Avenue, the ranch-home grids near West Oakland Park Boulevard, and the low-rise condo clusters along State Road 7. We’ve been opening the same permits at the Broward County building department for years, and we understand why a “simple” window swap here often turns into a masonry project.
What Impact Windows & Doors Costs in Lauderdale Lakes

These are the installed price ranges we quote in Lauderdale Lakes, based on openings we’ve measured in the city. Your written quote may land higher or lower depending on what the survey finds.
| Product / Scope | Price Range (Installed) |
|---|---|
| Standard impact single-hung window | $900 - $1,800 |
| Standard impact horizontal roller or sliding window | $800 - $1,500 |
| Large or custom-opening impact unit (block rework required) | $2,500 - $5,000 |
| Impact sliding glass door replacement | $2,200 - $4,500 |
| Whole-home impact package (typical 3/2 ranch) | $8,000 - $18,000 |
| Whole-home package with extensive block modification | $15,000 - $25,000+ |
What moves the number in Lauderdale Lakes specifically:
- Opening count and size. More openings mean more units, but also more permit fees and inspection visits.
- Block and stucco rework. When the rough opening is too narrow or un-square for a stock HVHZ unit, we cut block, set a treated wood buck, and restucco before the window goes in. This adds labor and material but is non-negotiable for permit approval.
- Floor height and access. Single-story ranch homes are straightforward; second-floor condo units or tight lot lines where we can’t stage a lift mean hand-carrying and longer install hours.
- Frame material. Vinyl impact units from CWS or ECO Window Systems sit at the lower end of our ranges; aluminum-clad or thermally broken frames from PGT or CGI run higher.
- Design pressure rating. Lauderdale Lakes is in Broward County’s High-Velocity Hurricane Zone. Every unit must carry a Miami-Dade NOA or Florida Product Approval matched to the opening’s PSF requirement, never exceeding +/-100 PSF.
We don’t quote from photos or descriptions. Our measured survey gives you a document you keep, and the written price on that page is the price on the final invoice. Haven Clause 1: Have it in writing.
Before
AfterWhy Sightline Windows & Doors Serves Lauderdale Lakes Differently
Most window companies treat Lauderdale Lakes like any other South Florida city. We don’t, because the city won’t let us. The 1960s-1970s CBS ranch homes that make up most of the housing stock here were built with rough openings sized for jalousie louvres and single-pane aluminum sliders, decades before the Florida Building Code standardized impact-unit dimensions. That means a “standard” replacement often isn’t.
Our Impact Windows & Doors team has closed permits at the Broward County building department for enough Lauderdale Lakes jobs to know the pattern. Off NW 31st Avenue near the canal-side blocks, our crew pulled a set of oxidized jalousie louvres out of a 1971 CBS ranch and found the rough opening 1 3/4 inches narrower than any stock PGT impact single-hung, so we reworked the block and stucco, set a treated wood buck, and shimmed a custom CGI unit onto the jamb before tying the Miami-Dade NOA paperwork to the closed county permit. Two doors down, a homeowner’s original aluminum sliding glass door had corroded rollers from year-round canal humidity - we replaced it with a laminated-glass impact slider and filed the wind mitigation form the same day.
This is the scope we identify before quoting, not after. The Haven Standard governs every installation we’ve completed since 2012, and Haven Clause 3 means the technician at your door is background-checked, uniformed, and identified by license number before arrival. Calls are answered by a live person, 24/7. The 365-Day Done Right Promise is stamped on every job, not offered as a courtesy.
Our Impact Windows & Doors Services in Lauderdale Lakes

Hurricane Impact Windows
Lauderdale Lakes sits in Broward County’s HVHZ wind-borne debris region, which means every replacement window must meet the strictest impact standard in the country. We specify laminated glass and reinforced frames from PGT, CGI, or CWS, matched to the design pressure rating your opening requires. For the ranch homes near West Oakland Park Boulevard, that often means custom-width units because the original masonry openings predate modern stock sizes.

Wind Mitigation & HVHZ Code Compliance
This is where most Lauderdale Lakes jobs differ from less-regulated markets. We pull the permit through Broward County, not the city, and every unit must carry a current Miami-Dade NOA or Florida Product Approval number tied to the specific configuration. Our survey documents the existing opening dimensions, the required PSF rating, and any block modification needed to achieve proper anchor embedment. The wind mitigation form we file after installation is what your insurance carrier needs to apply premium credits.

Single Hung Impact Windows
The workhorse replacement for Lauderdale Lakes’s original ranch homes. Single-hung impact units ventilate through the bottom sash while the fixed upper lite meets HVHZ requirements. We stock standard heights from PGT and CWS, but the width often requires custom fabrication - 4-6 weeks - because the 1960s block openings weren’t built to modern module dimensions. We tell you this during the survey, not on install day.

Double Hung Impact Windows
Where both sashes need to operate - second-story bedrooms, for example - double-hung impact units provide cleaning access and egress compliance. The hardware is heavier than single-hung, and the frame depth may require additional block recess in older CBS walls. We measure for this during the survey and note it on the written scope.

Horizontal Roller & Sliding Impact Windows
Common for wide openings in Lauderdale Lakes’s low-rise condominiums and for replacing original aluminum sliders in ranch homes. The roller mechanism is the failure point we see most often; canal humidity corrodes untreated hardware in 5-7 years. We specify stainless or polymer rollers with the replacement unit.

Vinyl Impact Windows
For homeowners prioritizing thermal performance alongside impact resistance, vinyl frames from CWS or Eco Window Systems service in Lauderdale Lakes reduce U-factor and SHGC compared to aluminum. The tradeoff is frame thickness; in some 1960s openings, the vinyl profile requires additional block recess or buck framing.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Common Impact Windows & Doors Problems We See in Lauderdale Lakes Homes
- Jalousie-to-impact swaps that underestimate the opening. The louvered rough opening in a 1960s CBS ranch is too small and un-square for any stock HVHZ unit. Without block and stucco rework, the anchor pattern can’t meet the design pressure rating and the permit won’t close. We scope this during the measured survey.
- Oxidized aluminum frames reused as “savings.” Original aluminum frames on 1970s homes are already corroded. Crews that clean them up and hang new sashes inside often create water intrusion at the jamb once sealants cure against uneven metal. We replace the frame assembly or set a new buck.
- Canal humidity destroying sliding door hardware. The network of lakes and drainage channels around Lauderdale Lakes keeps ambient humidity high year-round. Non-treated rollers and tracks on original aluminum sliders corrode and bind. We see this on homes near the canal blocks off NW 31st Avenue and along the western drainage corridors.
- Acreage-lot access constraints. Larger Lauderdale Lakes lots with well and septic setbacks push equipment off the driveway. If we can’t stage a lift or scaffold on grade, long material hauls and hand-carrying can knock glazing out of tolerance or leave the wrong unit staged in the yard. We walk the access route during the survey and note staging limitations on the written scope.
Trusted Brands We Specify in Lauderdale Lakes

We draw from eight manufacturer lines, specifying by what the opening requires rather than what is in stock. For Lauderdale Lakes’s HVHZ retrofits, we most often reach for PGT’s WinGuard aluminum or vinyl lines, CGI’s Estate Collection for custom architectural openings, and CWS for thermally efficient vinyl impact units. ViewLux fills the high-performance tier where sightline and daylighting requirements are tight. Every unit carries a current Miami-Dade NOA or Florida Product Approval; we document the number on your written scope and tie it to the closed permit.
Florida Pays You Back
Impact window and door upgrades in Lauderdale Lakes can access several incentive programs, though final eligibility rests with the program administrator or your carrier:
- My Safe Florida Home. Matching grants up to $10,000 for qualifying wind-mitigation upgrades, including impact-rated windows and doors. The program runs on appropriated funds; we can review whether your home qualifies during the survey.
- Florida sales-tax exemption. Impact-resistant windows and doors are exempt from state sales tax at purchase.
- Federal 25C energy credit. 30% of product cost, up to $600 per year, on qualifying energy-efficient units. We document the efficiency ratings on your written scope for your tax preparer.
- Windstorm-premium credits. Most carriers apply credits averaging around 25% on the windstorm portion of your premium after a qualifying wind-mitigation inspection. The inspection runs $75-$150; we file the form same-day on completed jobs.
We don’t guarantee program acceptance or carrier behavior. We do document every product specification and installation detail so your application has what it needs.
Impact Windows vs. Hurricane Shutters: What Lauderdale Lakes Homeowners Should Know

We install impact windows and doors; we do not sell or install hurricane shutters. The comparison matters because many Lauderdale Lakes homeowners with original jalousie or single-pane units consider shutters as a lower-cost alternative. Shutters require storage, annual installation, and manual deployment before a storm. Impact units are permanent protection - no panels to hang, no garage space consumed, no scramble when the hurricane watch is issued. For homes where the original opening must be reworked anyway to meet HVHZ code, the incremental cost of impact-rated glazing over shutters-plus-modification often narrows more than expected.
We Also Serve Cities Near Lauderdale Lakes
Our crews work throughout central Broward County, including Lauderdale Lakes and the surrounding cities of Lauderhill, Oakland Park, Sunrise, and Fort Lauderdale. Permitting and wind-zone requirements are similar across this corridor, though each municipality has its own inspection scheduling and setback rules. We scope these during the measured survey so the written quote accounts for local conditions.
Serving Lauderdale Lakes, FL - Our Local Coverage Area

We’re based in the Lauderdale Lakes area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Lauderdale Lakes
Because the original 1960s-1970s CBS ranch homes were built with rough masonry openings sized for jalousie and single-pane aluminum units, not modern HVHZ impact products. The opening is often too narrow, too short, or un-square for a stock impact unit to achieve proper anchor embedment and design pressure rating. Broward County won’t close the permit until the anchor pattern and frame installation meet Florida Building Code Chapter 16. We identify this during the measured survey and include the block rework in the written scope, not as a change order. Call (754) 240-8381 for an exact quote - estimates are free.
Broward County handles permitting for unincorporated areas and many municipalities, including Lauderdale Lakes. Your job will be reviewed at the county level for HVHZ compliance, Miami-Dade NOA or Florida Product Approval verification, and design pressure matching. We pull the permit, schedule inspections, and don’t close the job until the county signs off. Call (754) 240-8381 for an exact quote - estimates are free.
No. Jalousie windows have louvered openings with no structural frame capable of meeting HVHZ anchor requirements. The entire opening must be reworked in block and stucco to create a proper rough opening for a code-compliant impact unit. This turns what looks like a single-window job into a masonry and finishing project. We scope this during the measured survey and document it on the written quote. Call (754) 240-8381 for an exact quote - estimates are free.
Most carriers apply windstorm-premium credits averaging around 25% after a qualifying wind-mitigation inspection documents impact-rated openings. The exact percentage depends on your carrier, your policy structure, and what other mitigation features your home has. We file the wind mitigation form same-day on completed jobs; your agent applies the credit. Call (754) 240-8381 for an exact quote - estimates are free.
Yes, and we recommend it when the access and staging are already mobilized. Larger Lauderdale Lakes lots with well and septic setbacks can push equipment off the driveway; if we’re already routing material hauls and managing scaffold placement for the main house, adding a shop or ADU opening to the same scope reduces per-unit mobilization cost. We measure every opening and document the access constraints on the written quote. Call (754) 240-8381 for an exact quote - estimates are free.
Schedule Your Free Measured Survey in Lauderdale Lakes

Every job we take in Lauderdale Lakes begins with a measured survey you keep. The technician documents your opening dimensions, existing frame condition, access constraints, and any block modification required for HVHZ compliance. The written quote that follows is the same document we install from - no change orders, no surprises. Haven Clause 1 since 2012.
Call (754) 240-8381 to schedule your free estimate. A live person answers, 24/7.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Lauderdale Lakes since 2012 under the Haven Standard.
Six Reasons Homeowners Choose Sightline Windows & Doors Lauderdale Lakes
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Lauderdale Lakes Services
