New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Lauderdale Lakes pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Window Replacement: The Lauderdale Lakes Owner’s Guide
We stock and install ES Windows-compatible replacement windows and hardware throughout Lauderdale Lakes, with typical installed pricing running $380-$720 per opening for standard vinyl or aluminum units and $890-$1,450 for impact-rated replacements. Most ES Windows hardware failures - balances, locks, rollers, and sash assemblies - can be diagnosed and quoted same-day, with stock parts available for the ES 100, ES 200, ES 500, and ES 8000 series. Homeowners in Lauderdale Lakes usually discover the problem when a window won’t stay open, rattles in a northeast wind, or shows condensation between panes that wasn’t there last hurricane season.
Which ES Windows Models This Applies To
ES Windows manufactures four residential series we encounter regularly in Broward County: the ES 100 (single-hung vinyl, non-impact), ES 200 (horizontal roller, vinyl frame), ES 500 (single-hung aluminum, impact-rated), and ES 8000 (casement and awning, aluminum, impact-rated). The part you need depends on which series is installed, and the label location varies. On the ES 100 and 200, check the top of the sash for a stamped series mark and a date code; the ES 500 and 8000 typically carry a permanent label in the head jamb or on the hinge side of the frame.
We match OEM hardware where ES Windows still produces the component, and we source verified aftermarket equivalents when the factory part is discontinued. One compatibility gotcha: the ES 500 balance assembly changed spring calibration in 2019, so a 2017 unit and a 2021 unit with identical frame dimensions may require different balances. We verify this on-site with a tension gauge before ordering. Sightline Windows & Doors Lauderdale Lakes is an independent service provider, not affiliated with ES Windows.
Our trucks carry ES 100/200 roller assemblies, ES 500 tilt latches, and common ES 8000 operator arms. If the measurement isn’t written down, it doesn’t exist - we record every spec before anything is ordered.
Before
AfterSigns Your ES Windows Window Replacement Is Failing
- The sash drops or won’t stay raised. This points to a failed balance system - coil springs or block-and-tackle assemblies that counter the sash weight. In Lauderdale Lakes, we see this accelerate in units facing west, where afternoon heat cycles the metal fatigued faster than north-facing installations.
- Visible moisture or fog between glass panes. The insulated glass unit (IGU) seal has failed, releasing the argon fill and allowing humid South Florida air inside. Once the desiccant saturates, the fog becomes permanent; the IGU needs replacement, not cleaning.
- Rolling window sticks, grinds, or jumps the track. The roller assembly is worn or the track itself is damaged. ES 200 horizontal rollers are particularly prone to this in coastal Broward, where salt air corrodes the axle bearings over six to ten years.
- Lock won’t engage or the handle spins freely. The cam or keeper has stripped, often from forcing the lock while the sash is warped or the frame is out of square. Continuing to use it stresses the frame and can distort the weatherstrip seal.
- Draft or water intrusion at the sill after rain. The weatherstrip has compressed beyond recovery, or the sill track drain holes are blocked with debris. In Lauderdale Lakes, afternoon thunderstorms test this seal weekly during summer; a failed weatherstrip channels water to the subfloor.
Replacement Cost & What’s Included
| Component | Typical Range (Installed) | What’s Included |
|---|---|---|
| Balance assembly (ES 100/200) | $180 - $290 | OEM or matched aftermarket balance, removal, installation, sash rehang, operation test |
| IGU replacement (ES 500/8000) | $340 - $580 | Measured IGU order, old unit removal, new seal and setting, argon fill verification |
| Roller assembly (ES 200) | $140 - $220 | Dual-roller set, track cleaning, alignment check, lubrication |
| Lock/keeper set | $95 - $165 | Matched finish hardware, striker adjustment, seal compression test |
| Full sash replacement | $420 - $680 | Factory-ordered sash, hardware transfer, balance pairing, finish trim |
| Full window replacement (standard) | $380 - $720 | Removal, new ES Windows unit, insulation, interior/exterior trim, cleanup |
| Full window replacement (impact-rated) | $890 - $1,450 | Impact-rated unit, permit, installation to HVHZ code, photo documentation |
What drives the range: frame material (vinyl vs. aluminum), glass specification (single-pane, insulated, or impact-laminated), and whether the opening requires reframing. Every quote we write in Lauderdale Lakes is the final invoice - Haven Clause 1. The 365-Day Done Right Promise covers the installation and hardware function; IGU seal failure carries the manufacturer’s warranty, which we document and register.
DIY or Call Us?
There’s a short list of what a Lauderdale Lakes homeowner can safely check before calling: verify the lock isn’t obstructed by paint buildup, clear sill track drain holes with a wire, and confirm the window is fully closed before engaging the lock. Beyond that, ES Windows hardware involves spring-tensioned balances and precise sash weights that can release abruptly, and impact-rated units weigh substantially more than they appear. We’ve replaced sashes where a DIY attempt bent the frame beyond repair.
We bring a measured survey, a written scope, and the correct part. Call (754) 240-8381 to schedule - estimates are free, and we carry common ES Windows hardware on the truck.
FAQs
Typically 12-18 years for north- and east-facing units, 8-14 years for west-facing installations that take the full afternoon thermal cycle. Salt air within five miles of the coast can shorten this by 20-30 percent. Call (754) 240-8381 and we’ll tension-test yours on-site - estimates are free.
No. A failed IGU seal cannot be resealed to factory specification in the field; the desiccant is saturated and the argon fill is lost. Replacement with a new IGU is the only fix that restores the original U-factor and SHGC performance. Call (754) 240-8381 for a measured quote - estimates are free.
Balance or lock replacement on a standard single-hung takes 45-90 minutes per opening. IGU replacement requires ordering; once the unit arrives, installation is 60-120 minutes per window. We schedule arrival times, not four-hour windows - Haven Clause 2.
We stock ES 100/200 rollers, ES 500 tilt latches and balances, and ES 8000 operator arms on our Lauderdale Lakes trucks. Specialty hardware or factory-color-matched components typically arrive within 3-5 business days. Call (754) 240-8381 to confirm availability for your series - estimates are free.
Written by Sonia Raman, Owner, Sightline Windows & Doors Lauderdale Lakes at Sightline Windows & Doors Lauderdale Lakes, serving Lauderdale Lakes and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Lauderdale Lakes
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Lauderdale Lakes Services
