New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Lauderdale Lakes pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Window Installation: The Lauderdale Lakes Owner’s Guide
CGI window installation in Lauderdale Lakes typically runs $340 to $890 per opening for standard replacement, with most jobs scheduled within 48 hours of the measured survey. We stock CGI-compatible hardware, glazing beads, and frame components for same-day repair on common failures. Most Lauderdale Lakes owners discover a problem when their CGI impact window won’t lock flush, the sash drifts after release, or they notice daylight between the frame and the wall after a storm season.
Which CGI Models This Applies To
CGI’s product line breaks into three series families, and the part you need depends on which one is in your wall. The Estate Series uses a heavier extrusion with a 3-1/4 inch frame depth and a distinct bulb seal gasket that compresses against a raised stop. The Sentinel Series runs thinner at 2-7/8 inches and uses a wedge-style glazing bead that locks from the interior side only. The Targa Series, common in Lauderdale Lakes retrofit jobs from 2016 to 2020, splits the difference at 3 inches flat and uses a snap-in glazing bead with a visible tension clip.
We find the model number stamped on the spacer bar between the glass panes, visible when you open the sash and read the edge of the insulated glass unit. If the spacer bar label is worn, we measure the frame depth at the head jamb and check the glazing bead profile against our sample board. OEM glazing beads from CGI run $18 to $34 per linear foot; quality aftermarket equivalents from CWS and ES Windows match the profile within .015 inch and cost $12 to $22. We carry both on the truck and specify which we’re using on the written quote. Sightline Windows & Doors Lauderdale Lakes is an independent service provider, not affiliated with CGI Windows.
Before
AfterSigns Your CGI Window Installation Is Failing
- The sash drops or won’t stay open. This usually means the balance shoe or coil spring assembly has lost tension. In Lauderdale Lakes, we see this accelerate after humid summers when aluminum tracks corrode and bind, forcing the balance to work harder.
- Visible gap between frame and wall, or water staining on the interior sill. The installation flange seal has failed, or the original installer didn’t back-seal the nailing fin against the WRB. South Florida’s driving rain finds every gap.
- Lock won’t engage or feels spongy. The keep striker has shifted, or the multipoint lock rod is bent from forcing a misaligned sash. CGI’s multipoint hardware is specific to series; a Sentinel lock won’t fit an Estate frame.
- Fog between glass panes that doesn’t clear. The insulated glass seal has failed. In coastal Lauderdale Lakes, salt air degrades the PIB primary seal faster than inland installations. The glass unit needs replacement, not repair.
- Glazing bead popping out or cracking. UV exposure hardens PVC beads after 8 to 12 years in direct south or west exposure. We replace with UV-stabilized compound or upgrade to rigid PVC depending on orientation.
Replacement Cost & What’s Included
| Component | Parts | Labor | Total Range |
|---|---|---|---|
| Glazing bead replacement (per opening) | $45-$95 | $120-$180 | $165-$275 |
| Balance/coils replacement | $65-$140 | $140-$220 | $205-$360 |
| Lock/keep hardware set | $85-$195 | $110-$170 | $195-$365 |
| Insulated glass unit (IGU), standard size | $180-$340 | $160-$250 | $340-$590 |
| Full frame-out replacement, CGI compatible | $220-$480 | $280-$410 | $500-$890 |
What drives the range: frame condition behind the trim, whether we match existing interior trim or replace it, and whether the opening requires structural adjustment for plumb. Every quote we write in Lauderdale Lakes includes the measured survey you keep, the written scope with line-item parts and labor, and the 365-Day Done Right Promise stamped under Haven Clause 5. The price on the page is the price on the invoice. If the measurement isn’t written down, it doesn’t exist.
DIY or Call Us?
An owner can safely check three things: read the spacer bar label for the model series, photograph the glazing bead profile from the side, and confirm whether the lock failure is the handle or the rod mechanism by removing the handle cover plate with a Phillips screwdriver. What goes wrong past that point: forcing a misaligned sash bends the multipoint rod, and the replacement costs triple. Removing an IGU without supporting the sash risks glass drop and frame distortion. The balance coil on a CGI Estate Series carries 18 pounds of constant tension; releasing it without a winding tool scars the track and can launch the shoe into the room. We carry the winding tools, the sample board, and the stock on the truck. Call (754) 240-8381 to schedule your free estimate.
FAQs
Glazing beads last 8 to 14 years depending on exposure; west-facing units in Lauderdale Lakes degrade fastest. Balance coils typically fail at 12 to 18 years, though we replaced several in Oriole Gardens at year 9 after the 2022 humidity spike pushed track corrosion. Call (754) 240-8381 for an exact quote on your opening - estimates are free.
Glazing beads and failed IGUs cannot be repaired; they must be replaced. Lock hardware sometimes needs only striker adjustment, which we do at no parts charge if that’s all it is. We tell you which it is during the measured survey. Call (754) 240-8381 for an exact quote - estimates are free.
Glazing bead or balance replacement takes 90 minutes to 2 hours per opening. Full IGU replacement runs 2 to 3 hours including cure time for the sealant. We schedule morning starts in Lauderdale Lakes to finish before afternoon storms. Call (754) 240-8381 to schedule.
We stock glazing beads, balance shoes, coil springs, and lock hardware for all three CGI series. IGUs are measured to order and arrive in 5 to 7 business days. If we don’t have it, we tell you when it ships, not after we’ve started. Call (754) 240-8381 to confirm availability for your series.
Ready to price your CGI window installation in Lauderdale Lakes? Call (754) 240-8381 to schedule your free measured survey. You’ll receive the written quote before any work starts, a documented photo record when the job finishes, and the 365-Day Done Right Promise under the Haven Standard. We also stock and install PGT, CWS, and ES Windows components if your home has mixed manufacturer lines.
Written by Sonia Raman, Owner, Sightline Windows & Doors Lauderdale Lakes at Sightline Windows & Doors Lauderdale Lakes, serving Lauderdale Lakes and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Lauderdale Lakes
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Lauderdale Lakes Services
