PGT Door Installation Nationwide | Sightline Windows & Doors Lauderdale Lakes

PGT Door Installation: The Lauderdale Lakes Owner’s Guide

PGT door installation in Lauderdale Lakes typically runs $1,850-$4,200 for a standard single entry unit, depending on impact rating, frame material, and whether the opening requires structural modification. We stock PGT-compatible hardware, thresholds, and weatherseal kits on our Lauderdale Lakes trucks, and most replacements can be surveyed and scheduled within 48 hours. Homeowners usually discover a problem when the door sticks in summer humidity, the sweep gaps let water pool at the threshold, or the multipoint lock no longer draws the slab tight against the frame after a few years of salt-air exposure.

Call (754) 240-8381

Which PGT Models This Applies To

PGT builds several door series that circulate through Lauderdale Lakes homes, and the part you need depends on which line is hung in your opening. The PGT Essential series uses a lighter aluminum frame with a snap-in glazing bead; PGT WinGuard carries the impact-rated laminated glass and a heavier reinforced stile with integrated multipoint hardware. The PGT Premier line upgrades to a thermal break frame and a different threshold profile altogether.

To identify yours, check the etched mark on the glass corner or the label on the hinge jamb. The model prefix tells us the series; the suffix tells us the size, handing, and glass option. If the label is painted over, we measure the slab thickness (WinGuard is typically 1¾ inches on impact units versus 1⅜ on non-impact), the frame depth, and the hinge spacing. OEM PGT hardware is our default for lock bodies and hinges; for thresholds and sweeps, we often source an equivalent from PEMKO or NGP that matches the exact profile without the six-week factory lead time. One compatibility gotcha: the WinGuard multipoint lock chassis changed slightly in 2019, so a pre-2019 lock body will not seat correctly in a post-2019 frame prep without milling. We check the lock faceplate stamp before ordering.

Before

After

Signs Your PGT Door Installation Is Failing

• The slab drags or binds in the jamb. In Lauderdale Lakes, the combination of summer humidity swelling the frame and winter dry contraction cycles the opening out of square. If the door only sticks from June through September, the frame has likely shifted; if it sticks year-round, the hinges may have elongated their screw holes or the threshold has compressed.
• Water pools inside at the threshold after rain. The PGT sweep or threshold seal has lost its compression set. On south-facing doors in Lauderdale Lakes, UV exposure hardens the bulb seal in about four to five years, faster than the manufacturer rating assumes for inland climates.
• The multipoint lock handle turns but the bolts don’t retract fully. The lock chassis is out of alignment with the keepers, or the spindle has worn where it engages the gearbox. This is common on high-use doors where the frame has settled slightly; forcing the handle accelerates wear on the internal cam.
• Daylight shows between the slab and the frame when closed. The adjustable hinges have backed out, or the door has sagged on its pins. On PGT’s heavier WinGuard units, hinge pin wear shows up first at the top hinge because the slab weight concentrates there.
• The glass fogs between the panes. The insulated glass unit seal has failed. In coastal Broward County, salt air accelerates edge seal degradation; we see this most often on west-facing doors that catch afternoon sun after morning dew.

Replacement Cost & What’s Included

What drives the range: impact versus non-impact glass, frame depth (standard 4⅝-inch versus custom 6⅞-inch for older block construction), and whether the rough opening needs reframing. Our quote includes the measured survey you keep, the written scope with part numbers, installation, debris removal, and the documented photo record. The 365-Day Done Right Promise covers the workmanship; PGT’s glass warranty runs 10 years on insulated units, 20 years on laminated impact glass. We pull permits when the job requires them and schedule inspection.

DIY or Call Us?

There is one thing a Lauderdale Lakes owner can safely check: the hinge screws. If the top hinge has pulled away from the frame, tightening with a proper driver may restore the reveal. Beyond that, PGT door installation involves several points where DIY goes wrong. The multipoint lock requires precise keeper alignment; a millimeter off and the gearbox binds or the bolts don’t seat. Impact-rated slabs weigh 150-220 pounds; one person cannot safely maneuver one without risk to the glass, the frame, or themselves. And if the threshold is not shimmed and sealed to the subfloor correctly, water intrusion follows within a season. We carry PGT-compatible hardware, thresholds, and seals on our trucks. Call (754) 240-8381 and we’ll survey the opening, write the price, and schedule the install.

FAQs