New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Lauderdale Lakes pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Fort Lauderdale
Window replacement in Fort Lauderdale runs $800-$1,500 per opening for impact-rated units, with whole-home packages typically between $8,000 and $25,000. Every replacement must carry Miami-Dade NOA or HVHZ-specific product approval, since Fort Lauderdale sits entirely inside Florida’s High-Velocity Hurricane Zone. Call (754) 240-8381 and we’ll schedule a measured survey; the written quote you receive is the same document we build from.
Our crews serve Fort Lauderdale from our South Florida dispatch office, covering neighborhoods from Coral Ridge to Rio Vista to Las Olas Isles. We know the local permit cycle at the Broward County Building Division, the anchor-pattern inspections they require, and the salt-air degradation that shows up on mid-block homes, not just oceanfront properties. If you’re replacing builder-grade windows in a newer development or upgrading original 1960s-70s units in a CBS home, we spec for Fort Lauderdale’s actual conditions: 170 mph wind speeds, year-round humidity above 75%, and canal fetch from two directions.
Why Sightline Windows & Doors Lauderdale Lakes Is Fort Lauderdale’s Preferred Window Replacement Company

We’ve installed more than 18,000 windows and doors since 2012, every one with a written price before work started and a documented photo record when finished. In Fort Lauderdale, that means we understand the difference between a Florida Product Approval and a Miami-Dade NOA, and we won’t quote a unit that can’t pass Broward County permitting.
Our technicians are background-checked, uniformed, and identified by license number before arrival - Haven Clause 3, Verified Crews. The person at your door is the person on the record. Live phone coverage runs 24/7, not a voicemail queue.
The 365-Day Done Right Promise is stamped on every job, not offered as a courtesy. If it’s not done right, we make it right. That applies to the anchor patterns Broward inspectors audit, the flashing details on canal-front homes, and the documentation your insurance carrier needs for wind-mitigation credits.
Our Window Replacement team brings eight manufacturer lines to Fort Lauderdale openings - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - specified by performance tier and price range, not by what we have in stock.
Before
AfterOur Window Replacement Services in Fort Lauderdale
Full Frame Replacement
Full frame replacement removes the entire existing window, including the frame and buck, down to the rough opening. In Fort Lauderdale’s 1950s-1970s CBS stock, this is often necessary because original single-pane aluminum jalousie and slider windows were never built for HVHZ loads, and the original buck attachment won’t pass current inspection. We set masonry anchors at engineered spacing, match design pressures to the opening’s PSF rating, and spec laminated glass interlayers that meet Miami-Dade NOA requirements. The measured survey you keep documents every frame reading and sightline measurement.

Insert Window Replacement
Insert replacement fits a new window into the existing frame, which costs less and disturbs less interior trim. In Fort Lauderdale, this works only when the original frame is structurally sound and the buck attachment meets HVHZ standards. We see too many inserts dropped into 1960s-70s jalousie openings without correcting the buck - Broward County inspectors audit anchor patterns and fail the permit. We check frame condition, anchor capacity, and water intrusion risk before recommending this path. If your home is in Coral Ridge or near Las Olas Isles with multidirectional wind exposure, we’ll tell you when insert replacement isn’t adequate.

Vinyl Replacement Windows
Vinyl frames resist salt corrosion better than aluminum in Fort Lauderdale’s environment, where canal systems push salt-laden air deep into non-oceanfront neighborhoods. We specify vinyl with multi-chamber construction and reinforced sashes rated for the HVHZ. Not all vinyl is equal - we source from PGT, CGI, and CWS lines with documented NOA numbers for the exact configuration we quote. The written price includes the frame material, glazing package, and installation method; nothing shifts at the job site.

Energy-Efficient Upgrade
Energy-efficient upgrades in Fort Lauderdale target U-factor and SHGC ratings that reduce cooling load in a climate where air conditioning runs most of the year. Low-E coatings, argon-filled IGUs, and warm-edge spacers matter here, but so does seal integrity - salt spray from the Intracoastal Waterway and year-round humidity above 75% degrades lower-grade insulated glass unit seals within 7-10 years. We spec IGUs and edge systems built for coastal exposure, not inland conditions. The upgrade often qualifies for federal 25C energy credits and wind-mitigation premium reductions.

Window Maintenance & Care
Maintenance extends service life in a climate that punishes hardware and seals. We inspect frame drainage, weep holes, weatherstrip condition, and operator function - catching the oxidation and hardware failure that salt air causes in Coral Ridge and Rio Vista homes far from the beach. Documented photo records from every visit show what we found, not what we felt about it. Maintenance visits also verify that prior installations maintain their HVHZ compliance as materials age.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Lauderdale

We install from eight verified manufacturer lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. In Fort Lauderdale, we stock PGT and CGI hardware and seals locally for faster turnaround on service calls. Every unit we quote carries a Miami-Dade NOA or HVHZ-specific product approval number matched to the exact configuration - size, glazing, frame reinforcement, and anchor pattern. We don’t substitute at install. The product on the quote is the product in your opening.
Common Window Replacement Problems We See in Fort Lauderdale Homes
- Failed IGUs from salt and humidity. Lower-grade insulated glass units fog within 7-10 years because Fort Lauderdale’s year-round humidity and salt spray push past seals that inland specs don’t anticipate. We see this on mid-block homes in Coral Ridge, not just oceanfront properties.
- Non-HVHZ-rated products sold as “impact.” Some windows carry Florida Product Approval but lack Miami-Dade NOA, which won’t pass Fort Lauderdale permitting and can void insurance credits. We verify the NOA number before quoting.
- Inadequate buck attachment on older CBS homes. Original 1960s-70s installations used lighter anchors than current HVHZ standards require. Broward County inspectors specifically audit anchor patterns and fail permits where buck attachment is insufficient.
- Single-direction flashing on canal-front homes. Homes in Las Olas Isles and Coral Ridge face wind-driven rain from Atlantic fetch east and canal fetch from the waterside. Standard inland flashing for one prevailing direction doesn’t hold. We spec for multidirectional pressure loads.
What Window Replacement Costs in Fort Lauderdale

Impact windows in Fort Lauderdale generally run $800-$1,500 per window installed, depending on frame material, glazing package, and opening size. Impact single-hung units typically fall in the $900-$1,800 range. Large or custom openings - picture windows, geometric shapes, openings above eight feet - run $2,500-$5,000. Whole-home packages with 10-20 openings typically land between $8,000 and $25,000+.
What moves the price in Fort Lauderdale specifically: the HVHZ rating required for every unit, not just new construction; floor height and access, since high-rise installations along the beach or Intracoastal require different equipment; frame material, with vinyl and aluminum-composite options at different tiers; and the condition of existing bucks and anchors, which determines whether full frame or insert replacement is viable. Canal-front homes in Coral Ridge or Rio Vista may need enhanced flashing and sealant packages for multidirectional exposure.
We don’t quote from photos or descriptions. Every engagement begins with a measured survey you keep, and the written quote cannot differ from that document - Haven Clause 1. Call (754) 240-8381 to schedule yours; estimates are free.
Florida Pays You Back
Several programs reduce the net cost of impact window replacement in Fort Lauderdale. My Safe Florida Home offers matching grants up to $10,000 for qualifying wind-mitigation upgrades - the program sets eligibility and fund availability. Florida exempts impact-resistant windows and doors from sales tax. The federal 25C energy credit provides 30% of product cost on qualifying energy-efficient units, capped at $600 per year. After installation, a wind-mitigation inspection ($75-$150) can trigger premium credits averaging around 25% on the windstorm portion of your policy - final numbers depend on your carrier and the inspector’s findings. We document every product approval number and installation detail you need to file.
We Also Serve Cities Near Fort Lauderdale

Our crews work across Broward County, including Window Replacement in Fort Lauderdale and neighboring Plantation, Pompano Beach, Hollywood, and Coral Springs. Each city has distinct permitting requirements and wind-zone considerations; we adjust specs accordingly rather than applying a single template.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Fort Lauderdale

Fort Lauderdale requires Miami-Dade NOA or HVHZ-specific product approval for every replacement window, not just new construction. Florida Product Approval alone is insufficient here because the city sits entirely within the High-Velocity Hurricane Zone, a threshold neighboring Palm Beach County does not impose. We verify the NOA number for every unit we quote. Call (754) 240-8381 and we’ll show you the documentation before you commit.
Yes. Fort Lauderdale’s 165+ miles of inland canals push salt-laden air deep into non-oceanfront neighborhoods, and the HVHZ requirement applies to every replacement citywide. We regularly see frame oxidation and hardware failure in mid-block Coral Ridge and Rio Vista homes that owners assumed were protected by distance from the ocean. The wind-load requirement is geographic, not proximity-based. Call (754) 240-8381 for a free assessment of what your specific opening needs.
It depends on your builder’s warranty terms and your HOA’s architectural guidelines, which many newer Fort Lauderdale developments enforce strictly. We review your documents before quoting, coordinate with your builder’s warranty administrator if needed, and spec replacements that meet or exceed the original performance criteria without triggering exclusion clauses. The measured survey and written scope become part of your documentation. Call (754) 240-8381 and we’ll walk through your specific warranty language.
Impact windows with Low-E coatings and proper SHGC ratings typically reduce solar heat gain significantly, but exact savings depend on your home’s orientation, shading, and existing HVAC efficiency. In Fort Lauderdale’s climate, where cooling dominates annual energy use, the bigger financial impact often comes from wind-mitigation insurance credits averaging around 25% on the windstorm premium after inspection. We spec units that qualify for both efficiency and mitigation documentation. Call (754) 240-8381 for a load calculation and written estimate.
Most Florida carriers offer wind-mitigation premium credits for documented HVHZ-rated openings, with credits averaging around 25% on the windstorm portion after a qualified inspection. The key is proper documentation: Miami-Dade NOA numbers, installation photos, and the wind-mitigation form completed by a licensed inspector. We provide the product and installation evidence; you file with your carrier. Call (754) 240-8381 to schedule replacement that generates the documentation you need.
We replaced a set of fogged original single-pane sliding windows in a 1970s CBS home off Bayview Drive in Coral Ridge, where the homeowner had assumed salt corrosion only hits beachfront. The jamb anchors on the old units had oxidized and the original buck attachment was too light for a canal-front wind load, so we set masonry anchors at engineered HVHZ spacing and spec’d PGT impact-rated units with a large-missile rating and laminated glass interlayer. The county inspector signed off on the anchor pattern on the first pass, and the homeowner got the wind mitigation documentation they needed for their insurance carrier.
Written by Sonia Raman, Owner at Sightline Windows & Doors Lauderdale Lakes, independently owned and operated under the Haven Standard since 2012.
Six Reasons Homeowners Choose Sightline Windows & Doors Lauderdale Lakes

Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Lauderdale Lakes Services
What Neighbors Say About Sightline Windows & Doors Lauderdale Lakes
